Thin Aluminum Strips Factories

As one of the thin aluminum strips factories in China, Haomei produced aluminum strips according to the requirement of customers. The raw materials of thin aluminum strip are pure aluminum or aluminum alloy cast-rolled aluminum coils, hot-rolled aluminum coils, which are rolled into thin-plate aluminum coils of different thickness and width by a cold rolling mill, and then longitudinally slitted into aluminum strip with different widths by a slitting machine according to the purpose.

The quality of the aluminum narrow strip is very important to thin aluminum strips factories sales and use. The users must avoid the above improper cleaning methods. If you want to clean the thin aluminum strip, you must first understand the correct cleaning method to avoid rubbing, damage or corrosion of the aluminum strip which will affect its use. Aluminum is easily oxidized in the air and during welding. The resulting anodized aluminum has a high melting point and is very stable and difficult to remove. Strengthen the protection during welding to prevent oxidation of thin aluminum strip. As a kind of aluminum products that are used more frequently, thin aluminum strips are unavoidable to be oxidized. The longer the storage time, the more likely it is to cause this phenomenon. The above are the methods and precautions to prevent the oxidation of the thin aluminum strip. I hope it will be helpful to users who are paying attention to the aluminum strip.

Thin aluminum strips factories who offer aluminum strip thickness less than 0.5mm usually strictly control the cutting quality. At the same time, after cutting, a multi-roll leveling system is added to flatten the edge burrs to reduce vertical burrs. So the thin aluminium strip product manufactured by Haomei Aluminum have high quality, clean surface, accurate thickness, less burr and good edge quality.